An Informational Brief on Polymer Machining

 

AIP Precision Machining has worked with many thermoplastics over the past three decades, including TORLON: a PAI, or polyamide-imide, engineered by Solvay Specialty Polymers.

 

Due to its reliable performance at severe levels of temperature and stress, TORLON is ideal for critical mechanical and structural components of jet engines, automotive transmissions, oil recovery, off-road vehicles and heavy-duty equipment.

 

AIP has over 35 years of experience machining complex components from TORLON and various other thermoplastic materials. We are providing this Machining TORLON Guide as yet another insightful technical brief about our polymer component manufacturing process, and how it differs from that of metal machining, injection molding, or 3D printing.

 

Plastic CNC Machining

Before discussing the process of machining TORLON, it’s important to understand exactly what plastic machining is.

 

CNC (Computer Numerical Control) machining is a process in the manufacturing sector that involves the use of computers to control machine tools. In the case of plastic machining, this involves the precise removal of layers from a plastic sheet, rod, tube or near net molded blank.

 

The early history of CNC machining is almost as complex as a modern CNC system. The earliest version of computer numerical control (CNC) technology was developed shortly after World War II as a reliable, repeatable way to manufacture more accurate and complex parts for the aircraft industry. Numerical control—the precursor to CNC—was developed by John Parsons as a method of producing integrally stiffened aircraft skins.

 

Parsons, while working at his father’s Traverse City, Michigan-based Parsons Corp., had previously collaborated on the development of a system for producing helicopter rotor blade templates. Using an IBM 602A multiplier to calculate airfoil coordinates, and inputting this data to a Swiss jig borer, it was possible to produce templates from data on punched cards.

 

Parsons’ work lead to numerous Air Force research projects at the Massachusetts Institute of Technology (MIT) starting in 1949. Following extensive research and development, an experimental milling machine was constructed at MIT’s Servomechanisms Laboratory.

 

Due to the many different kinds of polymers and composites, it’s important to have strong technical expertise of polymer materials when machining plastic components; some plastics are brittle, for example, while others cut similarly to metal. The challenge of plastics is their wide range of mechanical and thermal properties which result in varying behavior when machined. Therefore, it’s important to understand the polymer structure and properties of TORLON if you’re machining it.

 

Thermoplastics vs Thermosets

When it comes to polymers, you have two basic types: thermoplastics and thermosets. It’s crucial to know which one you’re working with due to distinct differences between how these two main polymer categories react to chemicals and temperature.

 

Thermoplastics soften when heated and become more fluid as additional heat is applied. The curing process is completely reversible as no chemical bonding takes place. This characteristic allows thermoplastics to be remolded and recycled without negatively affecting the material’s physical properties.

 

They possess the following properties:

• Good Resistance to Creep

• Soluble in Certain Solvents

• Swell in Presence of Certain Solvents

• Allows for Plastic Deformation when Heated

 

Thermosets plastics contain polymers that cross-link together during the curing process to form an irreversible chemical bond. The cross-linking process eliminates the risk of the product re-melting when heat is applied, making thermosets ideal for high-heat applications such as electronics and appliances.

 

They possess the following properties:

• High Resistance to Creep

• Cannot Melt

• Insoluble

• Rarely Swell in Presence of Solvents

 

Phenolic, Bakelite, Vinyl Ester and Epoxy materials would be considered examples of a thermoset, while ULTEM, PEEK, DELRIN and Polycarbonate materials are examples of thermoplastics.

The thermoplastic category of polymers is further categorized into Amorphous and Crystalline polymers per the figure below:

 

Machining Ultem
 

TORLON is considered an amorphous, high-performance thermoplastic. Most amorphous polymers are thermoform capable, translucent and easily bonded with adhesives or solvents.

 

 

Various Grades of Machined TORLON

 

What makes TORLON unique is how it possesses both the incredible performance of thermoset polyimides and the melt-processing advantages of thermoplastics. The compressive strength of (unfilled) TORLON PAI is double that of PEEK and 30% higher than that of ULTEM PEI. In fact, TORLON is considered the highest performing, melt-processible plastic.

 

High-strength grades of TORLON retain their toughness, high strength and high stiffness up to 275°C. This and its impressive wear resistance allow TORLON to endure in hostile thermal, chemical and stress conditions considered too severe for other thermoplastics. TORLON is also resistant to automotive and aviation fluids, making it a favorite of aerospace and automotive engineers.

 

One concern of using TORLON is that its moisture absorption rate is not as low as other high-performance plastics, so special care should be taken when designing components for wet environments.

 

There’s more than one particular type of TORLON PAI you can machine, and each has slightly different properties for perfecting this material’s use in different applications.

 

Here are several grades of TORLON PAI we machine regularly at AIP Precision Machining.

 

TORLON 4203

TORLON 4203 is the unfilled or natural grade of TORLON PAI that outperforms other grades with the best impact resistance and the most elongation. TORLON 4203 PAI can be used for a variety of applications but due to its good electrical properties, it is commonly machined for electronic equipment manufacturing, valve seals, bearings and temperature test sockets.

 

TORLON 4301

TORLON 4301 is a wear-resistant grade of TORLON PAI containing PTFE and graphite. It has high flexural and compressive strength with a low coefficient of friction, as well as good mechanical properties. Typical applications of 4301 are anything that requires strength at high temperature with wear resistance and low friction. This material is useful for parts such as thrust washers, spline liners, valve seats, bushings, bearings and wear rings.

 

TORLON 4XG

TORLON 4XG is a 30% glass-reinforced extruded grade of PAI well suited to higher load structural or electronic applications. When you need a high degree of dimensional control, this grade offers the high-performance you need. Various uses of TORLON 4XG include burn-in sockets, gears, valve plates, impellers, rotors, terminal strips and insulators, among others.

 

TORLON 4XCF

TORLON 4XCF is a 30% carbon-reinforced extruded grade of PAI that has the lowest coefficient of thermal expansion and the most impressive fatigue resistance of all plastic materials. This uncommon grade works well as a replacement for metal applications as well as mission-critical aerospace components, in addition to impellers, shrouds and pistons.

 

 

Machining TORLON

 

Annealing TORLON
TORLON PAI can be received in the form of rods, sheets, tube or film. Stress-relieving before machining through an annealing process is crucial, as it reduces the likelihood that surface cracks and internal stresses will occur from the heat generated. This also helps prevent any warping or distortion of your plastic materials.

 

TORLON additionally benefits from post-machining annealing to reduce any stress that could contribute to premature failure. Extruded TORLON parts, such as those machined from TORLON 4XCF and TORLON 4XG, benefit from an additional cure after machining to further enhance wear resistance; this is unique to PAI. Proper annealing of Torlon can require more than seven days in special ovens at AIP.

 

If the machine shop you are working with does not have a computer controlled annealing oven for plastics, then “head for dee hills” as they are obviously not TORLON machining experts.

 

Machining TORLON

An important consideration to have when machining TORLON PAI is how abrasive it is on tooling. If you’re machining on a short run, carbide tooling can be used, but polycrystalline (PCD) tooling should be considered for lengthier runs, machining for tight tolerance and any time you are working with reinforced grades.

 

Another thing to keep in mind when machining extruded TORLON shapes is that they have a cured outer skin, which is harder than interior sections. The outer skin offers the best wear and chemical resistance. If wear resistance and chemical resistance needs to be optimized, extruded TORLON should be re-cured.

 

TORLON PAI will nearly always require the use of coolants due to its stiffness and hardness. Non-aromatic, water-soluble coolants are most suitable for ideal surface finishes and close tolerances. These include pressurized air and spray mists. Coolants have the additional benefit of extending tool life as well.

 

Many metal shops use petroleum-based coolants, but these types of fluids attack TORLON. Many past experiences have shown parts going to customer without cracks, only to develop cracks over time due to exposure to metal machine shop fluids. Be sure to use a facility like AIP who machines polymers and only polymers.

 

Preventing Contamination

Contamination is a serious concern when machining polymer components for technically demanding industries such as aerospace and medical. To ensure the highest level of sanitation down to the sub-molecular level, AIP Precision Machining designs, heat-treats and machines only plastics, with any sub-manufactured metalwork processed outside our facility.

 

 

TORLON Machining Guide: Supportive Information

Medical Sector Biomaterials Guide

Energy Sector Materials Guide

Aerospace Sector Materials Guide

Amorphous Materials

 

 

Explore Our Inventory

 

or request a quote here.

Follow AIP Precision Machining on Linkedin

linkedin logo

3D Additive Manufacturing vs CNC MachiningThere’s no doubt that plastics have become more and more popular in modern medicine. Short lead times are essential in this industry, and both 3D additive manufacturing and CNC machining provide fast production times. When is your medical application better suited for 3D printing, though, and when does precision plastic machining have the upper hand in plastic manufacturing?

 

There are a few key differences and similarities between these types of plastic manufacturing that you should keep in mind for your medical applications. It helps to have a basic understanding of each manufacturing process, first.

 

Subtractive vs Additive Manufacturing

Subtractive Manufacturing

CNC machining is a type of “subtractive manufacturing.” This means that the process generally begins with a solid block of plastic material which is cut or shaped into the desired product through “removing” excess material.

 

While CNC machining requires more initial setup than 3D printing, it offers repeatability, accuracy for both large and small parts, and a wide range of polymers and composites to choose from, as well as a variety of surface finishes. It scales easily between one-time jobs and high-volume production.

 

Additive Manufacturing

3D printing is “additive manufacturing,” which means the initial material is built layer by layer, rather than removed as in subtractive manufacturing. 3D printing creates three-dimensional objects from reading a digital file’s blueprint. When working with plastics, you’re primarily talking about FDM 3D printing. While FDM is widely considered the most quick and cost-effective way of producing custom thermoplastic parts and prototypes, it also has the lowest dimensional accuracy and resolution of any other 3D printing technology.

 

Another option for additive manufacturing is SLS 3D printing, which fuses together the particles of thermoplastic polymer powders. This version of 3D printing has higher accuracy than FDM; however, it comes at the cost of longer lead times, which can be expensive in the medical industry.

 

Choosing the Right Technology for Your Medical Application

As always, choosing the correct technology is dependent on your particular medical application. What you value in your completed product can help determine which style of plastics manufacturing works best for your needs. Some of your considerations should be:

 

Material Consultancy

Both CNC machining and additive manufacturing work with a wide variety of thermoplastics, but those plastics react to manufacturing in different ways. Some materials machine more easily than others, while certain thermoplastic materials are more prone to warping in 3D printing.

 

Your manufacturer should be familiar with your chosen material and be able to discuss the process of machining or 3D printing it with you. At AIP Precision Machining, we have 35+ years of material and machining expertise and we include consultancy as an integral part of our manufacturing process.

 

Mechanical Properties

CNC machining ultimately provides greater dimensional accuracy and better performing properties than additive manufacturing. Machined thermoplastics possess both great mechanical and thermal properties with fully isotropic behavior. If your product requires unique, strong design with critical tolerances, then FDM 3D printing may not be not ideal; this type of printing is inherently anisotropic, meaning it isn’t the best option for mechanically critical components.

 

Medical applications, in particular, have unique considerations that ought to be taken into account, both for choosing your initial material and determining how it ought to be manufactured.

 

Precision Tolerances

Precision CNC machining provides close tolerances for your applications with a fine, burr-free finish. In fact, 3D printed products for the medical field regularly go into CNC machining post-processing as a secondary step in order to accomplish better tolerances or a finishing cut, as FDM parts tend to have visible layer lines.

 

Extreme tolerances up to 0.002mm can be produced by AIP Precision Machining, which can be necessary in demanding industries such as the medical, aerospace and energy markets.

 

Quick Turnaround

Both CNC machining and 3D printing have quick turnarounds, especially when compared to injection molding. Machining designs are crafted on the same computer applications used by 3D printers, so there is no cost associated with design changes for either type of plastics manufacturing. However, when time is truly critical, 3D printed parts can be delivered in 24 hours. Quality and functional usefulness, in this case, may be sacrificed for expediency.

 

AIP Precision Machining can guarantee your complex polymers machined in as little as 10 business days, with quality assured from concept to completion.

 

Volume of Production

Smaller batches, such as 1-10 plastic components, can be more cost-effective if produced with additive manufacturing. This is because using a non-standard blank size increases the cost of machining. Plastic machining, however, easily scales between small and large outputs.

 

If you require a high-quality product that possesses extreme mechanical and thermal strength, it is worth precision machining for that reason alone.

 

The Final Consideration? Experience.

The medical field often has no room for error when it comes to implants, spinal devices and orthopedic equipment. This is why—no matter what type of plastic manufacturing you choose—you want to be sure you’re working with an expert who understands the importance of sterilization, biocompatibility, and other traits that may be necessary for your application.

 

AIP is FDA and ISO 13485:2016 registered and has been audited by some of the most stringent OEMs in the orthopedic and medical device industries. We process our plastics with strict hygienic procedures.

 

Whoever you work with, be sure they understand the needs of your industry and have the experience to prove it.

 

Click here to learn more about the utility of each technology with regard to precision efficiency, materials and more.

Or, request a quote with AIP Precision Machining here.

Follow AIP Precision Machining on Linkedin

linkedin logo